Prerequisites
A DigiPara Liftdesigner project is open, with a shaft/pit where a ladder is needed.
DigiPara Liftdesigner 2027 release.
Steps
Select between pit ladder types.
Double click on the ladder to open the Select Product window.Ladder with wall fixings
Ladder in pocket
Ladder with beam fixings
Configure the steps.
In the properties window, under the group [0692] Ladder Steps set the steps properties:First Step Z0 — starting height of the first step
Number of steps — total count of steps
Step distance — vertical distance between steps; the step profile repeats automatically
Set the wall fixing position.
Position the fixing profiles independently via Fixing 0 Z0, Fixing 1 Z0, and Fixing 2 Z0 (Z-axis position of each fixing along the ladder).Adapt the pocket depth.
For the pocket type, additionally configure the pocket depth.
NOTE: The FIXINGS support option cannot be combined with pocket mode. Optionally, a separator beam for each fixing can be activated — it is placed automatically at the same height as the fixing.
Result: A correctly configured pit ladder with properly positioned steps, fixings, and optional separator beams.