L_GearArtTab

Column Name

Description

Data Type

Length

Allow Nulls

Default

GA_RID

ID-No. of the gear/machine
(ID-No.=RID number of the gear / buffer)
consecutive number

Integer

4

0
​

GA_DESC

Description of the gear/machine

VarWChar

50

✓

GA_SUB_DESC

Sub-description of the gear/machine

VarWChar

80

✓

GA_MF_RID

ID-No. of the manufacturer
​ID-No.=RID number of the manufacturer (MF_RID)

Integer

4

✓

0
​

GA_GP_GRP

RID number of the performance group which is possible for the gear / machine record set.

void

CGrGearComp::SetProfilGruppenParameter(double *pData)

{

CGrComp::SetProfilGruppenParameter(pData);

pData[0] = m_pTreibscheibe->m_pPulleyDimSet->m_PUD_B;

pData[1] = m_DZ_Edit;

pData[2] = m_EXT_Z_TOP_Edit;

pData[3] = m_EXT_XL_Edit;

pData[4] = m_EXT_XR_Edit;

pData[5] = m_EXT_YR_Edit;

pData[6] = m_EXT_YL_Edit;

pData[9] = m_GA_PUD_DIST_Edit;

pData[21] = m_pGearArtSet->m_GA_BB_DIST;

pData[50] = m_pGearPerformanceSet->m_GP_USER_PG_50;

pData[51] = m_pGearPerformanceSet->m_GP_USER_PG_51;

pData[52] = m_pGearPerformanceSet->m_GP_USER_PG_52;

pData[53] = m_pGearPerformanceSet->m_GP_USER_PG_53;

pData[54] = m_pGearPerformanceSet->m_GP_USER_PG_54;

}

Integer

4

✓

0
​

GA_PG_GRP

Number of the profile-group construction for the corresponding gear/machine

Integer

4

✓

0
​

GA_GFR_RID

RID number of the gear frame.

If more than one is possible, enter "-1":

In this case DigiPara Liftdesigner will ask the user whether the gear frame shall be changed. If yes, DigiPara Liftdesigner selects one matching gear frame according to the L_GearFrameConnectTab. The gear frame with the lowest GCF_IX will be taken, if more than one matching gear frame is assigned.

Integer

4

✓

0
​

GA_PUD_DIST

Distance between the centerline of the pulley and the centerline of the motor.

Insert always positive!

Double

9

✓

0
​

GA_PUD_DZ

Distance between the bottom of the gear and the center point of the pulley in z-direction

How to set the right DZ dimension.htm

Double

9

✓

0
​

GA_PU_B_MAX

Maximum width of the pulley

SmallInt

2

✓

0
​

GA_PUT_BASE_ID

No of the pulley-group, which is possible to fit to this gear

How to assign traction sheaves to the traction machine

Integer

4

✓

0
​

GA_BB_RID

RID number of the bearing-block.(Not in use, enter "0")

Integer

4

✓

0
​

GA_BB_DIST

Distance between centerline of the pulley and centerline of the bearing block

Double

9

✓

0
​

GA_HW_RID

RID number of the hand wheel. (Not in use, enter "0")

Integer

4

✓

0
​

GA_HW_ALPHA

Angle between the fixed y-axle of the gear and the hand wheel

Double

9

✓

0
​

GA_F_STAT_MAX

Maximum static load (in kg)

Double

9

✓

0
​

GA_LOCATION

Contains the alignment of gearing:

0x0001 — Right or "R"-type (else "L"-Type
0x0002 — Dynamic gearing (show dimensions Shaft0.Gear.EXT_XL, ...)

SmallInt

2

✓

0
​

GA_PART_NO

Item-No., Order No. or similar number which identifies the part

VarWChar

50

✓