Prerequisites
You've worked through the three Basic Typical Processes on a governor component.
Steps
Prepare and register the logo
1.) Prepare your logo image. Follow the recommendations: size max. 250 px, format PNG, BMP, or JPG, and a file name with no spaces or special symbols.
2.) Store the logo in the current data pool. Place it under the standard path: C:\ProgramData\DigiPara\2022\dcc\DataPool\Bmp\LDTreeNode\LDMF (the version number in the path may differ depending on your installed DigiPara Liftdesigner version).
3.) Register the new module file. Open the Module Files data table, select your library, create a new data record, and add your logo.
Link the logo to your BIM library
4.) Open the Select Product Images table and select your library. Switch on all filter levels, then open MF_DISPLAY_DESC.
5.) Add a new record with your library description. The description must match exactly your library's display description.
6.) Define the path including the correct file name. Point the record to your logo file's correct path and file name.
7.) Test the result in DigiPara Liftdesigner. Exchange a component and confirm your logo now appears for your library.
Result
Your logo image is prepared, correctly stored, registered as a module file, linked to your BIM library with a matching description, and confirmed to display correctly in DigiPara Liftdesigner. Your BIM component (governor) and your branding are both finished — the workflow's build phase is complete.