Skip to main content

Create and Publish an Escalator Catalog

Turn a manufacturer's duty table into an escalator package with the Escalator Builder and publish it to a catalog revision.

Written by Sabine Bunese

Planners can only choose escalator and moving-walk models that a supplier has published. You publish them by turning the manufacturer's duty table into an escalator package with the Escalator Builder, and then publishing that package to a catalog revision.

The Escalator Builder works in four steps, shown as a progress bar at the top of the page. Each step only opens when the one before it is done.

Prerequisites

  • You are signed in to EAO with access to My Catalogs

  • You have the manufacturer's data for the models, or a duty table already filled in from a fresh sample

Download the sample duty table

  1. Under My Catalogs, open the Escalator Builder.

  2. Click Download Sample Duty Table.

    You get an empty workbook with the structure EAO expects: the header rows, the data sheet ESCALATOR and the check sheet ESCALATOR_VALIDATE.

  3. Fill in the workbook ESCALATOR in Excel, or send it to the manufacturer to fill in. One data row describes one model.

NOTE: Always start from a freshly downloaded copy. The check sheet may change over time, and an old workbook may no longer pass the check.

Upload the duty table and build the package

  1. Click Upload Duty Table and choose the filled-in workbook.

  2. Check step 3. It lists the data sheet, whether it is valid, and the first and last data row EAO found.

  3. Optional: change Start Row and End Row to build only part of the table.

  4. Click Build.
    ​

Result: Step 4 shows how many rows were read and how many configuration files were written — one per data row. To keep a copy, click Download Escalator Package (.zip).

NOTE: Clear all removes the workbook and everything built from it, so you can start again.

If the duty table is refused

EAO checks every cell against the ESCALATOR_VALIDATE sheet before it writes anything. If a check fails, nothing is built. A red box at the bottom of the page names the sheet, the column and what is wrong.

Some columns of the check sheet are ranges (a lower and an upper bound), others are lists of allowed values. A range column must hold exactly two entries.

To fix it:

  1. Correct the workbook in Excel.

  2. Click Clear all.

  3. Upload the workbook again and click Build.

Publish the package to a revision

  1. Click Publish to revision.

  2. Choose the catalog:

    • Pick an existing escalator catalog, or

    • Click New Escalator Catalog, enter a name and, optionally, add a logo (ideally 290 × 180 px, max. 1 MB).

  3. For a new catalog, fill in the settings.

  4. Decide who sees the catalog:

    • Promote to everybody offers the catalog to every planner.

    • Specific users offers it only to the people you list. Enter a company e-mail ending (for example *@digipara.com) or complete e-mail addresses, separated by commas. Use this to let a tester try a catalog before general release.

    • With neither switched on, the catalog exists but no planner is offered it.

    • Sales regions limits the catalog to the regions it may be sold in.

  5. Enter a name for the new revision. Leave Use custom drawing sheets switched off — it is a feature preview and should only be changed on DigiPara's request.

  6. Click finish.

    EAO opens the new revision and extracts the package in the background. The tile shows Extracting … at first.

  7. After a few seconds, click the refresh button above the tiles.

Result: The package tile shows how many configurations it contains. The catalog is listed under My Catalogs › Escalators.

TIP: Before you promote a catalog to everybody, test it the way a planner will see it.

Catalog settings

Setting

What it does

Escalator type, Standard

Read from the duty table and can't be changed here. A catalog carries one type and one unit system.

Priority order

A number that ranks the catalog among the other catalogs of your contract.

Seismic zone max

The highest seismic zone the catalog may be used in. EAO checks it against the site.

Building type

The building types the catalog is offered for. EAO checks it against the building.

Did this answer your question?