Elevatorarchitect Online plans escalators and moving walks as well as elevators. They sit in the same buildings, use the same kind of catalogs and the same BIM viewer, and they follow the same idea: a manufacturer publishes what it can build, and a planner picks from it.
Who does what
Two roles work with escalators:
The supplier (application manager) turns a manufacturer's duty table into an escalator catalog and publishes it.
The planner creates an escalator or moving-walk project in a building, chooses a model and configures it.
What the supplier publishes is exactly what the planner can choose from. If a planner can't find a model, the answer is almost always in the catalog, not in the project.
The three kinds of installation
An escalator project is always one kind of installation. A building can hold several projects of each kind, but an escalator and a moving walk are never the same project and are never paired.
Type | Arrangements | What you set |
Escalator | Single, Parallel, Criss-Cross, Criss-Cross-Shifted | The lower landing. The upper landing and the travel follow from the building. |
Inclined moving walk | Single, Parallel, Criss-Cross, Criss-Cross-Shifted | The lower landing. The upper landing and the travel follow from the building. |
Horizontal moving walk | Single, Parallel | One floor and a horizontal length |
The arrangement sets the number of units: Single is one unit, every other arrangement is two. You can't add or remove units by hand.
Terms
Term | Meaning |
Duty table | The manufacturer's Excel workbook. One data row describes one escalator model the manufacturer can build. |
Escalator package | What the Escalator Builder makes from a duty table: one configuration file per data row, packed as a ZIP file. |
Escalator catalog file | One configuration file in a package, that is, one model specification. EAO lists them under Escalator Catalog Files. |
Catalog › Revision › Package › Files | The four levels of an escalator catalog. They work the same way as for elevator catalogs. |
Unit | One flight of an escalator, or one lane of a moving walk. |
Travel | The height an escalator climbs: the distance between its lower and upper landing. |
Truss length | The upper and lower truss length of a unit. The duty table gives a minimum and a maximum for each, and you choose a value in between. |
Where you find escalators in EAO
Planners: in every building, the section Escalators & Moving Walks below the elevator groups. Each tile is one project.
Suppliers: My Catalogs › Escalators for published catalogs, and the Escalator Builder under My Catalogs for building new packages.

