Skip to main content

How an EAO Project Is Structured

Sites, buildings and elevator or escalator groups: the three levels of an EAO project and how they work together.

Written by Sabine Bunese

A project in Elevatorarchitect Online is built in three levels: a site, the buildings on it, and the elevator or escalator groups inside each building. You create them in this order, and a wizard takes you through each level.

The three levels

Level

What it is

What you set

Site

The place where the building stands

Name, image, seismic zone, location, units

Building

One building on the site

Name, type, image, floors and elevations

Elevator and escalators group

One or more cars in one shaft arrangement.

One escalator, inclined moving walk or horizontal moving walk (1 or 2 units)

Cars, payload, speed, entrances, stops, brand.

Type, arrangement, landing, parameters, brand

A site can hold several buildings, and a building can hold several elevator and escalator groups. An elevator group with more than one car is a bank: up to eight cars that you plan together.

You don't have to do everything at once

Each wizard has a finish button and a button that takes you on to the next level. You can stop after the site and add the building later, or stop after the building and add the elevator groups later.

How the levels appear in EAO

  • Cards: My Projects shows your sites as cards. Open a site and you see its buildings; open a building and you see its elevator and escalator groups. The first card on each page creates something new on that level: NEW PROJECT, NEW BUILDING or NEW ELEVATOR/ESCALATOR PROJECT.

  • Breadcrumb: on a project page, the breadcrumb under the header shows where you are, for example My Projects › Site › Building › Elevator/Escalator group. Click a level to go back up.

  • Warnings: if something inside a site or building needs attention, its card shows a warning triangle. The triangle is passed up the levels, so you can follow it down to the problem.

What happens when you change or delete a level

  • Modify reopens the wizard of that level. For a building, you can change both wizard steps. For an elevator group, you can only change its name; cars and stops are changed in the elevator editor.

  • Delete moves the element to the Trash, together with everything inside it. Deleting a site also deletes its buildings and elevator groups. You can restore them from the Trash.

Did this answer your question?