Skip to main content

Create a Site

Create the site of a new EAO project: name, image, seismic zone, location and units.

Written by Sabine Bunese

A site is the top level of every EAO project. It holds the location, seismic zone and units that all buildings and elevator groups on it use. You create the site first, then add buildings and elevator groups to it.

Prerequisites

  • You are signed in to EAO

  • You know the country and state of the site

Steps

  1. On the Home page, click NEW PROJECT under Jump back in. The NEW SITE wizard opens. The STEPS panel on the left shows the three levels: site, building, elevator.

  2. In SITE NAME, enter a name for the site.

  3. Under SITE IMAGE, keep Let EAO choose an image automatically selected, or clear it to upload your own image. To get another automatic image, click Show a different image.

  4. Click next.

  5. Select the SEISMIC ZONE (0–5).

  6. Under SITE LOCATION, select the continent, then the country, then the state. Each list appears after you pick the one above it.

  7. Select the MODEL UNIT: Metric or Imperial.

  8. Choose how to continue:

    • To save only the site and add buildings later, click finish.

    • To add a building straight away, click New Building. EAO saves the site and opens the building wizard.

NOTE: finish and New Building only become active once you have selected the continent, country and state.

Result

EAO saves the site and opens the site page. The breadcrumb shows My Projects › site name. If you clicked finish, the page shows "0 buildings" and a NEW BUILDING tile. Click it whenever you are ready to add a building. The site is also listed under My Projects.

Did this answer your question?