Skip to main content

Create a Building and Define Its Floors

Add a building to a site and set its floors manually or from an IFC file.

Written by Sabine Bunese

A building sits on a site and defines the floors your elevators serve. The floor list you set here later becomes the list of possible stops for each elevator group.

Prerequisites

  • You are signed in to EAO

  • You have created a site, or you are in the NEW SITE wizard

  • You know the number of floors and the floor-to-floor heights

Steps

  1. Open the NEW BUILDING wizard: at the end of the site wizard, click New Building, or click the NEW BUILDING tile on the site page.

  2. In BUILDING NAME, enter a name.

  3. Select the BUILDING TYPE: Apartment, Office, Shopping centre, Public Transportation, Hotel, Storage, School or Hospital. The building type helps EAO filter compatible elevator series later.

  4. Optional: click Upload Building Image to add a picture. The ideal size is 290 × 180 px, max. 1 MB.

  5. Click next.

  6. Under BUILDING FLOORS, choose how to enter the floors:

    • Edit manually: you enter the floors yourself (default).

    • Automatically by IFC: if you already have an IFC file of the building, upload it and EAO fills in the floor data for you.

  7. With Edit manually, select the NUMBER OF FLOORS at the bottom. The floor list updates.

  8. Check the floor list:

    • FLOOR DESIGNATION: the floor name. Click a field to rename the floor.

    • FLOOR TO FLOOR HEIGHT (MM): the height between two floors. The default is 3,000 mm.

    • ELEVATION (MM): calculated from the floor-to-floor heights. To type elevations directly, select Edit Elevations.

    • MAIN FLOOR: the radio button marks the main floor. The default is the lowest floor.

    • To add a floor between two floors, click ⊕. To remove a floor, click ⊖.

  9. Choose how to continue:

    • To add an elevator group or an escalator straight away, click New Project and choose Elevator or Escalator.

    • To save only the building, click finish.

Result

EAO saves the building under the site. The breadcrumb shows My Projects › site › building, and the building header counts what it holds, for example "0 elevator groups · 0 escalators", until you add one.

Did this answer your question?