Skip to main content

Create an Elevator Group in Revit

Plan a new elevator group in Revit: the add-in takes the floors from your Revit levels and builds the elevator as Revit families.

Written by Sabine Bunese

Prerequisites

  • You are signed in to EAO in Revit.

  • The building's floors exist as Revit levels, and each level the elevator should serve is marked as Building Story.

Steps

  1. On the Add-Ins tab, click New Elevator.

  2. If the Revit project has no site yet, the window MODIFY SITE opens first.

    Click finish.
    ​

  3. If the Revit project has no building yet, the window MODIFY BUILDING opens next. Set up the building and click next. In BUILDING FLOORS, select the MAIN FLOOR. The list shows your Revit levels. Click finish.
    ​

  4. The window NEW ELEVATOR PROJECT opens. The STEPS column on the left shows the site and the building of the Revit project.

  5. Enter the ELEVATOR GROUP NAME and click next.

  6. Set the main requirements and click next:

  7. In STOPS & SERVICES, check the floors. The list shows your Revit levels with their elevations.

    • To change the top or bottom stop, open the drop-down list of the first or last floor and choose another level.

    • Clear FRONT for floors the elevator shouldn't serve.

    Click next.
    ​

  8. In ELEVATOR BRAND, point at a catalog card under PREFERRED ELEVATOR BRANDS or MORE ELEVATOR BRANDS and click Select. Then click finish.

    The configurator opens with the group.

  9. Check the values and change them if needed. To see more, maximize the window.

  10. Click Update. The window closes and Update Progress opens. The add-in loads the elevator families one by one. This can take a few minutes.

  11. When the progress bar shows 100 %, click Close.

TIP: Select Automatically close this dialog on Complete so you don't have to close the window yourself next time.

Result

The new group appears in the add-in panel, and its families are in the Revit model as Generic Models. The group is also saved in Elevatorarchitect Online under My Projects › Revit Plugin Root, in the site and building of your Revit project.

Did this answer your question?