You plan an elevator group with the same configurator you know from Elevatorarchitect Online, and the add-in builds the elevator as Revit families directly in your project.
It streamlines the BIM workflow for elevator planning by allowing the creation and editing of elevator projects within Revit and simultaneously updating them in your Elevatorarchitect Online documents.
What you can do in Revit
Create an elevator group for the building in your Revit project: number of cars, payload, speed, entrances, stops and the elevator brand.
Place the group in the building and change its position or angle.
Change the elevator later with the configurator, and rebuild it in Revit with one click.
Choose how detailed the Revit model is: LOD 100, LOD 200 or LOD 300.
Give the group's families a prefix so you find them quickly in the Project Browser.
How the add-in works with your Revit project
What | Where it comes from |
Floors and stops | The Revit levels of your project. Only levels marked as Building Story are used. |
Site and building | One site and one building per Revit project. You change them with Site and Building on the ribbon. |
Elevator families | Created by the add-in as Generic Models (for example |
Elevator data | Saved with your EAO contract. You find the project in Elevatorarchitect Online under My Projects › Revit Plugin Root. |
TIP: Because the data is saved in EAO, you can also open the elevator group in Elevatorarchitect Online in your browser. Changes made there reach Revit when you click Update for the group in the add-in panel.
What stays in Elevatorarchitect Online
In Revit, the configurator shows the sheets LOD 100, LOD 200, LOD 300, 2D Plan, 2D Verticals and 2D Details as a preview. To download drawings (DWG, PDF) or create a VT concept layout, open the project in Elevatorarchitect Online.
What you need
Autodesk Revit 2025 or later on Windows
An EAO account.

