Prerequisites
The car balustrade and assembly platforms are configured.
Steps
Type and hole
1.) Set the hall button type. The type can be set individually for the top and bottom floors and for the intermediate floors.
2.) Select the hole. The control panel hole can be changed via the properties — switch on Design Mode to pick holes directly in the drawing, or use the Breadcrumb window. The default setting is a wall opening.
3.) Adapt the hole size. Set the clearance via Hole Height, Hole Width, and Hole Depth.
4.) Edit the through hole. Adjust the size of the associated through hole via its properties, and position or incline it by setting an angle.
Position
5.) Adjust the position. By default, the hall button is placed in the right wall. Define other positions via the associated properties window.
Tip: In Design Mode, you can find components that are hidden in the shaft wall.
6.) Set an individual position for specific floors. Use grouping (Hall Button position) to give one panel a different position.
7.) Activate a further panel for a floor level. Activate additional components via the entry.
Result
Hall buttons have the right type per floor group, correctly sized holes and through holes, and the required positions — including individual positions and additional panels on specific floors.
Next Step