Open the Cabin Configurator dialog.
In the project Project tab → Project group select the Cabin Configurator button.

Activate the cabin design.
Select which shaft to configure and set the Car Design component state to Active.

Select the model.
In the Select Product dialog, select the wished configuration, and click OK.
​

Edit the ceiling.
Click the Ceiling node in the Objects window.

Set clearances and ceiling height.
In the Properties window, change the clearance settings or ceiling thickness.
​

Activate the Ceiling Panels properties.
Click the Panels node under Ceiling.

Set Column Count and Rows Count.
Panel width and length are then calculated automatically from these counts.

Manual panel arrangement.
For manual control of panel's arrangement, size, or count, set the arrengement to manual.
​

Activate the Ceiling Lights properties.
Click the Lights node under Ceiling.

Change the light model.
From the property group General, choose a different light component.

Set Column Count and Rows Count.
Change the rows and column counts for automatic arrangement.

To position a single light manually, set Lights arrangement to Manually, then edit that Light component's location directly.
​

Activate the Trap Door.
Check the Trap Door node (standard unchecked) and in the Properties window choose a model.

Adapt the trap door dimensions.
Set its width and depth.

Set the location relative to the cabin.
Adjust its position on the ceiling via the Location properties.
​

Click a wall item in the Properties window to change its panel arrangement and size.

Set Panel arrangement to Manually to enable the Number of Panels property, which manually sets the wall panel count for that wall.

Adjust the standard panel width via Default Panel Width.
​

Activate the mirror on the chosen wall.
Mirrors are deactivated by default — activate the component by checking the Mirrors node located under the wished wall.

Select the configuration.
Choose a mirror configuration from the Select Product window.

Set the mirror size.
Set the mirror width and height either indirectly — adjust the distance from the mirror area to the wall's left/right/bottom/top edges, or directly — set Width Calculation to Calculate X1 and Height Calculation to Calculate Z1.

Reposition the mirror.
Via its X0/X1 and Z0/Z1 values.
​

Activate the component.
Click the Emergency Door item in the Properties window; activate the component if it isn't visible.

Set its vertical location and size.
Via the Emergency Door Location and Size properties.

Optional: Set the key hole's location and size via the Emergency Door properties.
​

Activate the Seat node.
Click the Seat item in the Properties window; activate the component if it isn't visible.

Set its location and size.
Via the seat's location and size properties.

Set its integration options.
Control whether the seat cuts through other wall components.
​

Select a COP configuration.
Choose anthoer model if wished.

Set its location and number of panels.
Via the COP's number & location properties, it's possible to set the wall and the distances to position.

Set its integration options.
Control whether the COP cuts through other wall components.
​