Prerequisites
You can edit the integration report in Excel, reload it, save it as a template, and load external Excel files (with a SyncWithLD sheet).
The EL3 training file Your EL3 Excel Project Integration is available (see attachment below)
Steps
Every BIM component has its own unique RID number. In DigiPara Liftdesigner you can exchange a component by entering a different RID number in the properties window — and you can do the same via the Excel Project Integration. In this step you build a drop-down list in Excel to exchange the guide rails, using this example:
Guide rail | RID |
T89A |
|
T90B |
|
1.) Look up the RID numbers of the components. In DigiPara Liftdesigner, select the guide rail and check its RID number in the properties window. Entering a different RID number there exchanges the component.
2.) Specify the source data for the list. In the Excel report, specify the source data for the drop-down list (e.g. the guide rail designations T89a and T90B).
EL3 training file Your EL3 Excel Project Integration
3.) Define the function that returns the RID number. Define the function that converts the selected entry into the RID number that DigiPara Liftdesigner uses for the component exchange.
4.) Link the RID reference and exchange the component. Make sure the GD_RID reference is in the SyncWithLD sheet with a sync mode that transfers the value to the project, and that it's fed by your function (as in Step 4). Select the other guide rail in the drop-down list and transfer the value — the guide rail in the project is exchanged.
Result
You can exchange BIM components in the project by picking a designation from a drop-down list in Excel, which sets the correct RID number via the Excel Project Integration.
Next Step





