This article is the first part of a sequential step-by-step tutorial on Excel reports and automation in DigiPara Liftdesigner: simplified Excel reports, Excel Project Integration, component exchange via drop-down lists, and defining your own Excel file.
Prerequisites
DigiPara Liftdesigner and Microsoft Excel are installed.
Basic knowledge of Excel and of using the DigiPara Liftdesigner Data tree and project references. The basic module A3 – Drawing Creation Fundamentals is recommended before this tutorial.
Steps
DigiPara Liftdesigner lets you export project values — such as forces, dimensions, or strings — to other file formats, such as *.rtf, *.xls, and *.html.
1.) Create the practice elevator project. Using the Shaft Wizard, create a project with:
5 floors, typical floor-to-floor distance 3000 mm
Consider travel: No; Create building floor levels: No
Traction elevator, 2:1 roping
13 persons / 1000 kg, 1 m/s
Machine room: Below / left
Car roping: 2 pulleys below, with CW safety gear
Counterweight roping: 1 pulley on top, counterweight left
Sheet templates: LD Installation Drawing, LD Typical Views For Your Elevator
Car size: width 1600 mm, depth 1400 mm
Entrances: front on all floors, rear on the first and last level
Individual floor-to-floor distances: Pit 1200 mm; E1 2900 mm; E2 3000 mm; E3 3000 mm; E4 3800 mm
2.) Save the project. Save it under the file name LDTrainingSample.ld3. The Reports button stays inactive as long as the project hasn't been saved; once it's saved, the button becomes active.
3.) Create a default report. Some default documents — for example, the Sample-Lift-Data Excel report — can be created right away via the export option in the File menu. Create it and look at the project values it contains.
Result
The practice project LDTrainingSample.ld3 is saved, the Reports button is active, and you've seen what a default Excel report with project values looks like.
Next Step



