Skip to main content

Step 7 of 8: Adjust the Scene Settings and Lighting

EL5.7: Cabin Design 3D Visualization & Light Settings

Written by Alexandra Göttert

Prerequisites

  • You've created a luminous surface (green frame around button E), a rough surface with a bump map, and tested Specular/Shininess highlights on a handrail.

Steps

Scene settings

The Scene Settings docking window controls the settings of the 3D model's surroundings.

1.) Adjust the lighting settings. Set the scene light intensity and direction, choose a scene light style (bluish, earthy, or full white ambient light), and set the model light intensity.

2.) Choose the visual style. Visual styles enable mirrors, smooth geometry edges (ambient occlusion), and shady outlines. They're available both in the property grid and as ribbon items.

Tip: These settings reduce performance. Turn them on shortly before exporting your finished design.

3.) Adjust the opening angle. Change the opening angle of the viewing perspective.

4.) Change the background color.

Lighting

Customize the light settings around and inside the cabin with Scene Lights and Model Lights.

5.) Switch the ambient lighting on or off. Ambient lighting is On by default.

6.) Set the light intensity. Choose Weak, Moderate (default), or Strong.

Result

The 3D model's surroundings — light style and intensity, visual style, perspective, background, and ambient lighting — are set up for your visualization.

Next Step

Did this answer your question?