Skip to main content

Manage an Escalator Project

Rename, change the catalog or delete an escalator project

Written by Sabine Bunese

Give an escalator project a new name, plan it with another manufacturer's catalog, or remove it from the building.

Prerequisites

  • You are signed in to EAO

  • The building with the escalator project is open, or the project is open in the configurator

Rename the project

  1. Open the menu:

    • In the configurator: click the three dots after the project name in the breadcrumb, or

    • In the building: click the three dots on the project tile.

  2. Choose Modify.

  3. Enter the new name and confirm.

Result: The project tile and the breadcrumb show the new name.

NOTE: Modify only changes the name. To change anything else, use the configurator.

Change the catalog

  1. In the configurator, click CHANGE CATALOG.

    The brand step of the wizard opens, with the current brand selected.

  2. Click Select on another brand.

  3. Click finish.

Result: The configurator shows the new catalog. Check REQUIREMENTS — if the new catalog has no model that meets them, the group goes on hold.

Delete the project

  1. Open the building.

  2. On the project tile, click the three dots.

  3. Choose Delete.

Result: The project moves to the Trash. EAO doesn't ask for confirmation, but you can restore it, just like an elevator group: click your name in the top right corner, choose Trash, and click Restore on the project's card.

Did this answer your question?