Skip to main content

Step 7 of 18: Use the Explanation of Parameters and Values for the Car Door

PL4.7: Explanation of Parameters and Values in the Data Pool

Written by Alexandra Göttert

Prerequisites

  • A new car door record exists in the DigiPara BIM Library.

Steps

1.) Review the car door's typical 3D parameter groups. Using the same developer .dwg reference file as for the landing door (see Step 3), work through the car-door-relevant parameter groups:

  • Opening Type & Door Panels: DT_B_Y = 49

  • Sill Dimensions: DT_S_Y = 54, DT_S_Z = 30

  • Door Frame Left in Y-Direction: DT_Z_Y1 = 25

  • Main Characteristic & Apron Size: DT_DRAW_TYPE = Sliding door, Do not draw ghost panels

Result

You understand what each of the car door's key 3D parameters controls.

Note: Unlike the landing door, this tutorial does not show separate "Load," "Developer Work Area," "Modify 3D Geometry," or "Save" steps for the car door — the car door shares the same underlying door data structure already prepared while building the landing door.

Next Step

Did this answer your question?