Skip to main content

Step 6 of 9: Understand Components and Edit Dimensions

A1.6: Components & Dimension Basics

Written by Alexandra Göttert

Prerequisites

  • You know the ribbon tabs and the practice project LDTrainingSample.ld3 is open.

Steps

List and single components

1.) Distinguish list and single components. List components appear several times in the elevator — for example shaft doors, rail brackets, shaft lighting; the component or its parent is marked by an index. Single components occur only once — for example the gearing, car frame, or safety gear.

Exchange components

2.) Exchange a component via the Component Navigator. Double-click the component, or use its category [0020] property items.

3.) Exchange a list component — for example the shaft door. When you exchange the landing door, the program offers to exchange the car door automatically as well. By default, the door is exchanged on all floors at the current wall.

4.) Apply a change to one list component only. Select the component and set property [0195] Grouping to "this … is different." All changes (exchange or dimension) then apply to the selected component only. Grouping is available for most list objects.

Edit dimensions

5.) Understand that dimensions drive the 3D BIM model. Editing a dimension value — for example the car width — changes the 3D BIM model.

6.) Edit a component dimension. Use the Properties docking window, or double-click the dimension. Values can also be changed in Design Mode (hatches turned off). Grayed-out dimensions generally can't be edited — with the exceptions below.

7.) Edit a fixed BIM component dimension. For example a shaft door: select the component, open Extended door dimension, activate the User defined check box, and edit the shaft door width (DW).

8.) Change a resulting dimension. Resulting dimensions can't be edited directly, but some — such as shaft width (SW) and shaft depth (SD) — can be changed via the Properties docking window.

Result

You can tell list and single components apart, exchange components (including list components on one floor only via Grouping), and edit regular, fixed, and resulting dimensions.

Next Step

Related Video Tutorial

Did this answer your question?