Skip to main content

Step 7 of 9: Configure Floor Levels

A1.7: Floor Levels

Written by Alexandra Göttert

This is the Floor Levels section and finishes the practice project's floor settings.

Prerequisites

  • You can exchange components and edit dimensions.

Steps

1.) Open the floor level settings. Open the Group and Shaft Configurator on the Project tab — the current project is loaded automatically in the background.

2.) Change the number of floors. Add 1 or 10 floors at once and set the floor distance of new floors. To delete a floor level, cross the corresponding row with the mouse cursor.

3.) Customize floor-to-floor distance, headroom, and pit. Add a check mark to activate the Floor to Floor editing option. For the practice project set: Pit 1200 mm, E1 2900 mm, E2 3000 mm, E3 3000 mm, E4 3800 mm.

4.) Mark entrances and modify floor designations. For the practice project set entrances at the front on all floors and at the rear on the first and last level. Rear entrances can only be added if the counterweight is located on the left or right side — otherwise the option isn't available.

5.) Use Sloppy Mode for large projects. Sloppy Mode improves performance — for example for projects with more than 50 floors — by letting you hide other levels while you edit individual ones. Apply the changes via Project tab → Recalculate Project. (Topic for Shaft Groups & High Rise tutorial)

Result

Floor count, floor-to-floor distances, pit, headroom, entrances, and designations are configured.

Next Step

Related Video Tutorial

Did this answer your question?