Skip to main content

Step 3 of 13: Position and Orient the CAD Model

EL4.3: Orientation of CAD Models in Liftdesigner

Written by Alexandra Göttert

Prerequisites

  • The CAD model's settings are configured: geometry copy embedded (or file path checked), render color, Picking selects parent, and tessellation detail.

Steps

1.) Set the orientation. With the CAD model selected, define its orientation using the X, Y, and Z buttons. They're active only when a CAD model is selected.

2.) Move the CAD model with X0, Y0, and Z0. In the CAD model's properties, set the X0, Y0, and Z0 coordinates (shown with a gray coordinate system). You can use:

  • Fixed values

  • 3D parameters (gray colored)

  • Equations combining 3D parameters and fixed values

3.) Redefine the base point, if necessary. Switch the Base Point Offset property to Yes and enter fixed values to redefine the CAD model's base point (shown with a colored coordinate system). This doesn't affect the original CAD model.

4.) Restore the original positioning, if needed. You can return the CAD model to its original positioning at any time by clicking on RM under CAD Models.

Result

The CAD model is correctly oriented and positioned in the elevator project, driven by fixed values, 3D parameters, or equations, so it follows changes to the project dimensions.

Next Step

Did this answer your question?