Skip to main content

Step 1 of 13: Load a 3D CAD Model into Your Elevator Project

EL4.1: Replace the Liftdesigner geometry with your 3D CAD model

Written by Alexandra Göttert

This article is the first part of a sequential step-by-step tutorial on reusing your own 3D CAD models in DigiPara Liftdesigner: loading and configuring CAD models, positioning them, improving performance, working with occurrences and LOD, driving CAD models through automation, and sharing modified models.

Prerequisites

  • DigiPara Liftdesigner is installed, and an elevator project is open.

  • The EL4 training models are downloaded and saved on your computer. They are used throughout this tutorial: the door fixing models (STEP), the three rail bracket examples (SolidWorks), and the car frame (SolidWorks) with a prepared Liftdesigner project (.ld3). Your_EL4_Training_CAD_Models.zip attached (see below)

  • Additionally, you can find a practice CAD model in your data pool within the CADmodel folder, in case you are unable to download.

  • Optional but recommended: your own 3D CAD models. Practicing with your own models is very useful — you'll see right away how they behave in DigiPara Liftdesigner.

  • Supported CAD formats:

CAD application

File types

Autodesk® Inventor®

.iam, .ipt

PTC® Creo®

.asm, .prt

SolidWorks®

.sldasm, .sldprt

STEP files

.stp, .step, .stpz

  • For the CAD automation steps later in this tutorial, the corresponding CAD application must be installed on your machine — SolidWorks for the training models, or the application your own models were created in.

Steps

The CAD model is displayed exactly as it was designed. It may need to be adapted to the dimensions of your elevator project — this is covered in the following steps.

1.) Select the component you want to replace and click Add. You can follow along with one of the EL4 training models or with one of your own CAD models. Select the existing DigiPara Liftdesigner BIM component that the CAD model will replace, then click Add on the CAD Models tab. The remaining (grayed-out) buttons on the tab become active as soon as a CAD model has been added and selected.

2.) Select the CAD model file. In the first step of the dialog, select the 3D CAD model file on your computer. [ Screenshot: Step 1 — Select a Model ]

Note: If a CAD model has multiple configurations, the last saved configuration is always inserted.

3.) Assign a component group. In the second step, choose the component group the model is assigned to. The component group controls the visibility of the new CAD model. You can change it later in the associated component properties, if needed.

4.) Review the import report. DigiPara Liftdesigner automatically creates a report showing the update status of the imported CAD model — for example, that the file has been imported successfully and that the model is synchronized to all list objects. The correct position and orientation are set in the following steps.

5.) Hide the original Liftdesigner geometry. Adjust the Project Level Geometry Information of the existing DigiPara Liftdesigner BIM component that you no longer need, so that only the CAD model is shown. The change is accepted for all list objects.

Result

The CAD model is part of your elevator project, assigned to a component group, and synchronized to all list objects. The original Liftdesigner geometry is no longer shown.

Next Step

Did this answer your question?