SolidWorks is required to perform the exercises with the training files.
Prerequisites
You can set the LOD for occurrences via the properties window and LOD Quickedit.
The rail bracket examples from the EL4 training models download are saved on your computer.
SolidWorks is installed locally (required for the automation exercises with the training examples).
Steps
Instructions before the automation process
CAD automation links DigiPara Liftdesigner parameters with the parameters of your 3D CAD model (Automation ribbon group → Assign), so you can drive your CAD models from within Liftdesigner. It works in two stages: (1) parameter mapping, and (2) running the automation.
1.) Load, position, and orient the rail bracket example models. The EL4 training models include three differently constructed rail bracket examples, prepared in SolidWorks to demonstrate CAD automation. Load them into the project, described in the following steps, then position and orient them as in previous Steps.
2.) Check and remove write protection. Check the CAD files for write protection in advance, and remove it if necessary — otherwise the automation can't update them.
3.) Switch to bounding boxes for complex models. When you use multiple or complex CAD models with many parameter mappings, simplify the geometry with Show Bounding Boxes before starting the automation. This speeds up your work in the project.
4.) Know what happens when the automation runs.
The last installed (current) version of the CAD program is used.
The CAD program isn't closed after the automation.
A report is loaded automatically.
The update of the CAD model is displayed.
The CAD models are closed after the update.
Result
Write protection is removed, and you know how the automation process behaves.
Next Step



