Skip to main content

Step 11 of 13: Work with Configurations, Exclude Models, and Update the Original CAD Files

EL4.11: Update your original CAD Model and related Drawings

Written by Alexandra Göttert

Prerequisites

  • The controlling part is added to the Assign Automation dialog, its width is defined with a Rule Editor equation, and the part is moved up to IX 0.

Steps

CAD model configurations

1.) Understand how configurations are displayed. DigiPara Liftdesigner always displays the last saved configuration of the CAD model. The existing configuration names are shown, but they can't be activated in Liftdesigner.

2.) Switch configurations via a controlling parameter. If the configurations are controlled by a parameter query in the CAD software, you can still show the different configurations in DigiPara Liftdesigner: link the controlling CAD parameter with Data tree parameters. Changing the parameter then switches the configuration (e.g. Standard / Simple Bracket).

Loaded CAD Models docking window

3.) Exclude CAD models from the automation. In the Loaded CAD Models docking window, clear the check mark next to a CAD model to exclude it from the automation process.

Open models in the CAD application

4.) Update the original CAD files when you choose. Decide yourself when — or whether — to update your CAD files in SolidWorks, Inventor, or Creo, using the Open in CAD feature.

5.) Update the related drawings. DigiPara Liftdesigner updates your complete 3D CAD model as well as the associated production drawings.

Result

You can show different CAD configurations, control which models take part in the automation, and update the original CAD models and their production drawings.

Next Step

Did this answer your question?