Skip to main content

Step 12 of 13: Share Modified CAD Models with Node Files

EL4.12: CAD Model Node Files

Written by Alexandra Göttert

Prerequisites

  • You can show configurations via a controlling parameter, exclude models in the Loaded CAD Models docking window, and update the original CAD files and drawings with Open in CAD.

Steps

A node file stores the selected settings, the CAD model geometry, the path to the original file, and the parameter mapping. Other DigiPara Liftdesigner users can use it instead of the CAD model.

  • The node file is embedded in the project file by default.

  • Automation can only be performed if the path of the original file stays the same and all users have access to the source (file paths are absolute).

  • If the files are stored on a network, several users shouldn't work with the node file and perform the automation at the same time.

1.) Save the component as a node file. Click Save this BIM Component, then choose Save as DigiPara Node File.

2.) Choose where to store the node file. Node files are saved as *.LDXUserComp. The default path is C:\ProgramData\DigiPara\*\dcc\DataPool\PGNodes; you can select a different path to suit your requirements.

Tip: If node files are meant to be a regular part of the DigiPara Liftdesigner data pool, register them as module files in the DigiPara Liftdesigner Datamanager, then export and distribute the corresponding .ldm12 file.

3.) Load the node file in another project. Load the DigiPara node file, with all its previously made settings, into other DigiPara Liftdesigner projects. 

Result

Your modified CAD model — including its settings, geometry, original file path, and parameter mapping — is saved as a node file that you and other users can load into other projects.

Next Step

Did this answer your question?