Apply what you've learned in three exercises.
Prerequisites
You can save a CAD model as a DigiPara node file (
*.LDXUserComp) and load it into other projects.The EL4 training models are downloaded: the door fixing models and the car frame with its prepared project.
Optional: your own CAD models for Exercise 2.
For the automation exercises: SolidWorks (or the CAD application of your own models) is installed locally.
Steps
Exercise 1: Load CAD models for door fixings
1.) Load and align the door fixing models. Load the 3D CAD models for the top and bottom fixing elements of the landing doors from the EL4 training models (DP-STP DF02 0000 01, DP-STP DF02 0000 02), and align them.
2.) Switch off the original geometry. Hide the original Liftdesigner geometry of the door fixings.
3.) Set the parent element. Turn on Picking selects parent to optimize the selection function.
Exercise 2 (automation option 1): Automate your own CAD models
4.) Automate the parameters of your own CAD models. This is the recommended exercise if you have your own CAD models — it's the best way to test the automation process with the models you'll actually work with: map their parameters in the DigiPara Liftdesigner project and run the automation.
Exercise 3 (automation option 2): DigiPara training example — car frame
If no custom CAD model is available, use the car frame (SolidWorks) CAD model and the prepared DigiPara Liftdesigner project (*.ld3) from the EL4 training models download.
5.) Open the prepared project.
6.) Load and align the car frame CAD model correctly.
7.) Define the automation for the required parameters.
Result
You've loaded and configured CAD models for door fixings and applied CAD automation either to your own models or to the DigiPara car frame training example.
Tutorial complete
This was the final step of the EL4 CAD Models & Automation tutorial. You've loaded, configured, positioned, copied, reloaded, and removed CAD models, improved performance with bounding boxes, worked with occurrences and LOD settings, driven CAD models through direct parameter mapping, Excel files, and Rule Editor equations, handled configurations, updated the original CAD files and drawings, and shared modified models as node files.



