This chapter provides a brief guide on how to insert CAD models for door mounting components and how to configure them appropriately.
Prerequisites
The PL4 tutorial has been completed in its entirety up to this point.
The training file
(Your_PL4_Training_CAD_Models.zip)attached here was downloaded and unzipped for training purposes.
Steps
1.) Copy a BIM component within the same library. Copying an existing door fixing element using the Copy BIM Components function. This process automatically generates a new profile group along with the new fixing element. Afterward, the designation should be edited.
The left-hand door fixing element.
For the right-hand version of the door-fixing element, it is practical to use the copy function (Ctrl+C and Ctrl+V); this creates an additional fixing element while retaining the same profile group.
2.) Assign the Fixing Group to the Landing Door. Assign the new fixing elements to the right and left positions of the shaft door in the Landing Doors data table.
3.) Reload the landing door and and thus dependent components. Reloading the landing door in the Liftdesigner automatically loads the new fixing elements for the left and right sides into the project.
Select one of the fixing elements - either on the left or the right - and then execute the Develop this BIM Component function to update the developer views.
4.) Import and align the CAD model. Import the CAD model in addition to your simplified Liftdesigner L-profile. Select one of the developer views and choose the Add command under CAD Models. Then, in Step 1, use Select CAD Model File... to choose the training CAD model DP-STP DF02 0000 02 from the attachment you downloaded. The Component Group is already set correctly by default; click Finish to import the CAD model. Use the functions within the Orientation ribbon group under Develop BIM Component to perform the final alignment of the CAD model.
5.) Define your LOD settings. For lower LOD levels, a simple L-profile is displayed; you can configure this by selecting the desired LOD levels for the chosen Liftdesigner profile via the checkboxes in the drop-down menu within the profile's properties.
For the CAD model, LOD settings are also configured via the properties, once the corresponding element - for example, the RootOccurrence - has been selected in the Occurrences docking window. In LOD350-LOMAX, the By Parent setting should be chosen in order to display complex geometry at higher LOD levels.
6.) Save the BIM component. To save the new CAD models for the fixing elements in the database, select Save the BIM Component under Develop BIM Component. In Step 2 of the dialog, you will find your CAD model listed.
Check the profile group for your new fixing elements (left and right). You will now also find a copy - referred to as PGNodes in the data pool - of your CAD model, displayed under Additional Component.
7.) Reload your shaft door and check your LOD settings. Once the landing door component is reloaded, the new CAD model for the fixing elements will appear on both the left and right sides. You can adjust the LOD (Level of Detail) settings via the properties in the view frame to verify when the simplified L-profile is displayed versus the full CAD model.
Result
Your fixing elements on the left and right are flexible in how they are represented—appearing in a simplified form at low LOD levels, or in greater detail at higher LOD levels.
Tutorial complete
This was the final step of the tutorial on loading door products.


















