Skip to main content

Step 2 of 13: Configure the CAD Model Settings

EL4.2: CAD Model Settings in Liftdesigner

Written by Alexandra Göttert

Prerequisites

  • A CAD model has been loaded via CAD Models → Add, assigned to a component group, and the original Liftdesigner geometry is hidden via Project Level Geometry Information.

Steps

1.) Decide whether to embed a geometry copy. Embed a geometry copy in your project so the CAD model is also shown when you share the .ld3 project file. Yes (embedded) is the default.

2.) Check the file path if the geometry copy isn't embedded. When you share .ld3 files without an embedded geometry copy, the file path must be checked. The correct path is preselected automatically according to the program logic. Typical cases:

  • are Relative to Project: The CAD file is transferred together with the project file (.ld3).

  • are Absolute: The CAD file is stored in a central file repository.

  • are Relative to Pool: The CAD file is placed in the data pool.

  • are Relative to the Project Folder: When working within the DigiPara Liftdesigner Cloud.

3.) Set the color of the CAD model. The coloring (render) of a loaded CAD model can be set individually in its properties.

4.) Turn on Picking selects parent. With this setting, clicking the CAD model always selects the original DigiPara Liftdesigner parent BIM component, and the CAD model becomes a child component. This is especially recommended for components that consist of several CAD models.

5.) Fine-tune the display with Tessellation Detail. Increase the number of polygons to refine how the CAD model is represented — for example, for a handrail with large roundings.

Result

The CAD model is embedded (or correctly linked), colored as you want, selected via its parent component, and displayed with the level of detail you need.

Next Step

Did this answer your question?