Skip to main content

Step 6 of 13: Set the LOD for CAD Model Occurrences

EL4.13: LOD CAD Model Settings

Written by Alexandra Göttert

Prerequisites

  • You can use the Occurrences docking window to review the occurrence tree, show polygon counts, disable unused occurrences, and select occurrences by filter.

Steps

Occurrence properties

1.) Select one or more occurrences. When you select more than one occurrence, the properties window shows their common properties. By default, the LOD of an occurrence is always by parent.

2.) Set the LOD in the properties window. Set the LOD for the selected occurrences in the properties window. Edited occurrences are marked in the tree, and the tooltip shows the number of polygons for the selected element and all its children.

LOD Quickedit

3.) Open LOD Quickedit. Use the LOD Quickedit tool to set the LOD of the occurrences.

4.) Filter occurrences and assign your own LOD. Select the relevant occurrences with a filter and assign your own LOD.

5.) Check the result at the different LOD levels. Review how your CAD model looks at the different LOD settings in DigiPara Liftdesigner.

Result

The CAD model's occurrences have LOD settings that suit your drawings and 3D views — detailed where needed, simplified elsewhere.

Next Step

Did this answer your question?