Prerequisites
Entrance pockets are created and configured.
Steps
1.) Display the entry properties. Select the entry concrete in a vertical view, in edit mode (hatches turned off).
2.) Select a sill option. Choose No, Foundation pocket, or Foundation drip lip. The option applies to all entries on the corresponding shaft wall.
3.) Define the sill depth and height. Use the DY and DZ dimensions.
4.) Apply the sill option to a single entrance only. Set the Grouping option individually.
Pitfall: This property must be set before the additional sill option is applied.
5.) Use different sill options per floor. For example, a foundation pocket on one floor and none on another.
Result
You can apply an additional sill option (foundation pocket or drip lip) per shaft wall, size it via DY/DZ, and vary it for individual entrances and floor levels.
Next Step